Loading Tables on PinPad
Loading tables in pinpad is called the process where application information is loaded and chip parameters on the pinpad.
This process makes it possible to read a chip card during transactions.
Normally, CliSiTef performs this operation automatically, on demand, when it realizes that a new parameter load. There are several reasons for this, for example changing the pinpad at the POS, or a changing establishment parameters on the authorizer side.
Automation can command a new load of tables on the pinpad. For example, to reduce the chance of a load on the first sale of the day, automation can start a load when it is in an idle state and then In this way, reducing the time for the first service.
Note that, if there is a change to parameters by the authorizer, this change will reflect a new load of tables during the day.
12.1 With changes in Automation#
For the automation to command the loading of tables on the pinpad, three function codes are offered that must be be used in IniciaFuncaoSiTefInterativo.
| Function code | Description |
|---|---|
| 770 | Loading tables on pinpad |
| 771 | Forced loading of tables on pinpad (Local) |
| 772 | Forced loading of tables on the pinpad (SiTef) |
Function 770 loads tables into the pinpad if necessary. That is, if the SiTef server data is already are loaded on the pinpad, no loading will be done.
Function 771 forces tables to be loaded onto the pinpad according to tables previously downloaded from the server SiTef and which are stored locally at the POS.
Function 772 causes clisitef to delete local data from the POS, downloading a new photograph from SiTef of these parameters, and then load tables into the pinpad.
In the example above,
- option 11 is equivalent to Function 770;
- option 12 is equivalent to Function 771;
- option 13 is equivalent to Function 772.
To enable the Table Load transaction on the pinpad, it is necessary to include the value 3624 in the [General] section of the TransactionsAdditionalHabilitated key.
To enable the Forced Table Load transaction on the pinpad (Local), it is necessary to include the value 3625 in the [G eral] section of the TransactionsAdditional Enabled key.
The Forced Table Load transaction on the pinpad (SiTef) is enabled by default, with the value 3626.